Skip to main content
The Odd Spoke Phone

Need Help?

(02) 9653 9388

Proper installation of the Mips® Air Replacement System is essential for the helmet to work as intended.

The Mips® Air System is held in place by a number of fixations that are each connected to the helmet with hook and loop Velcro™.

When removing the Mips® Air system, pinch each Mips® fixation (fig. 1) with two fingers, then gently pull away from the helmet, preferably by lifting one side of the fixation at a time.
Repeat the process for each fixation of the system (fig. 2).

When re-installing the Mips ® Air system, make sure that every Velcro is positioned correctly by aligning one at a time.

WARNING! The Mips® Air System is designed and tested for use with the intended Mips® Air equipped helmet model and size only. The Mips® Air system are not interchangeable between other helmet models or sizes. Installation of Mips® Air system on an incompatible helmet or size may result in the helmet not performing as intended.

CAUTION: Pulling too hard may remove the inner Velcro tabs from the helmet and / or causing the fixation to break. Pads may be cleaned by carefully rinsing in lukewarm water and dried in room temperature.
 

SKU 3312988
Brand MET
Shipping Weight 0.1000kg
Shipping Width 0.200m
Shipping Height 0.050m
Shipping Length 0.300m
Shipping Cubic 0.003000000m3

Be The First To Review This Product!

Help other The Odd Spoke users shop smarter by writing reviews for products you have purchased.

Write a product review

Goes Well With

More from this category